> Components>Boards>Mikrotik RB411GL - AP, Point-to-Point or CPE
Mikrotik RB411GL - AP, Point-to-Point or CPE OEM applications View larger

Mikrotik RB411GL - AP, Point-to-Point or CPE

RB411GL

New

The RB411GL is created for high-end wireless AP, Point-to-Point or CPE OEM applications. It has Gigabit Ethernet port, so you can take full advantage of 802.11n standard.

Unit has one miniPCI slot for your choice of miniPCI wireless card, powerful Atheros 680MHz CPU, 64MB of RAM and a USB port for 3G or storage.

More details

USD$79.00

QuantityDiscountYou Save
40 5% USD$158.00
100 10% USD$790.00

This product is no longer in stock

Add to wishlist

The RB411GL has one miniPCI slot, one Gigabit Ethernet port and a USB port for 3G or storage. Use this device in an outdoor case for a CPE device, or a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. The Gigabit port allows you to fully benefit from the 802.11n MIMO wireless speed. It’s powered by an Atheros 680MHz CPU and has 32MB of RAM and a Level4 RouterOS license.

Performance test results

RB411GL (680Mhz)Gigabit port testRouterOS
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone187.3122.9171.9728.958.0712.7
Bridging25 bridge filter rules86.456.784.5358.358.5718.8
Routingnone147.096.4136.1577.159.7733.6
Routing25 simple queues137.089.9117.7499.055.2678.3
Routing25 ip filter rules59.238.859.4251.954.7672.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Performance test results

RB411GL (680Mhz)Gigabit port testRouterOS
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone187.3122.9171.9728.958.0712.7
Bridging25 bridge filter rules86.456.784.5358.358.5718.8
Routingnone147.096.4136.1577.159.7733.6
Routing25 simple queues137.089.9117.7499.055.2678.3
Routing25 ip filter rules59.238.859.4251.954.7672.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
CPU frequency :
680 MHz
CPU cores :
1
Size of RAM :
64 MB
10/100 Ethernet ports :
0
10/100/1000 Ethernet ports :
1
SFP ports :
0
SFP+ ports :
0
MiniPCI slots :
1
MiniPCI-e slots :
0
USB ports :
1
USB slot type :
USB Type A
Power Jack :
1
CPU model :
AR7161-BC1A
802.3af support :
No
PoE in :
Yes
Voltage Monitor :
Yes
PCB temperature monitor :
No
CPU temperature monitor :
No
Operating temperature range :
-30C to +60C
Current Monitor :
No
Operating System :
RouterOS
License level :
Level 4
Dimensions :
105x105mm

No customer comments for the moment.

Write a review

Mikrotik RB411GL - AP, Point-to-Point or CPE

Mikrotik RB411GL - AP, Point-to-Point or CPE

The RB411GL is created for high-end wireless AP, Point-to-Point or CPE OEM applications. It has Gigabit Ethernet port, so you can take full advantage of 802.11n standard.

Unit has one miniPCI slot for your choice of miniPCI wireless card, powerful Atheros 680MHz CPU, 64MB of RAM and a USB port for 3G or storage.

Write a review